Individual Room Heating – Fixed Equipment

Posted by admin
Categorized Under: Home Appliances, Home Improvement
Comments: 0

A self-container heater which warms all or part of a room and is either fixed to the floor or wall, or is too cumbersome to move from room to room. Fixed heaters are generally cheaper to run that portable ones, as they can use cheaper fuels such as gas and off-peak electricity.

Electric Radiant Fire

There are types for mounting on the wall or standing in the fireplace. Some are quite plain, consisting of 2 or 3 heating bars like the standard portable model, but you can buy radiant/ convector types which emit heated air into the room, and there are also artificial coal and artificial log models.

Electric Underfloor Heater

The underground version of the electric storage heater. Uses cheap-rate electricity at night. The stored heat is released during the day. The heat is evenly distributed all round the room. Obviously it is usually installed when the house is being built, but it is possible to put in an underfloor heating system in an existing home.

Gas Log-Effect Fire

There are gas fires which produce real flames above a bed of artificial logs or glowing coals — the cheeriness of a ‘real’ fire without the mess and trouble of coal or wood. There is a major drawback — such fires are thermally inefficient as most of the heat goes up the chimney. They are also a hazard like any open fire.

Electric Storage Heater

The most economical electric heater. It is programmed to use cheap-rate electricity at night — the heat stored in the solid core is then released during the day. One of the problems has been the danger of the heat being exhausted by the end of the day — modern models have a booster control.

Gas Radiant Fire

The traditional type of gas fire bears a series of elements which glow when heated by a series of gas jets. There is rapid visible warmth, but it is better to buy a radiant/convector heater which warms the air as well as the objects in front of it. There are glass-fronted models with heating elements in the form of ‘logs’ or ‘coals’.

Solid Fuel Open Fire

In the past this was the only type of heater, and even today it is regarded by many as an essential feature. Guard against the dangers of flying sparks and naked flames. There are several modern improvements — throat restriction, fan assistance and underfloor ventilation. The chores of refuelling and regular cleaning remain.

Electric Oil-Filled Radiator

The large panels or tubes contain oil which is heated by the electric elements contained within. Floor-standing and wall models are available — the heating action is identical to a radiator in a central heating system. The room is warmed evenly. Expen­sive — full-rate electricity is used.

Gas Convector Heater

It is slightly more efficient to turn gas energy into convected rather than radiant heat, but a gas convector lacks a cheery glow. There are no hot elements to guard against and so the convector heater is the closest gas-fired equivalent to a standard radiator in the absence of central heating. Buy a thermostatically-controlled model.

Popularity: 1% [?]

Remodeling Your Home in The Sweetest Way

Posted by admin
Categorized Under: Home Improvement
Comments: 0

It is a very exciting matter to remodel your home. Isn’t it? If you do so you are sure to relish the beauty of your home for years and your urge to live in the home for ever would flourish. It may be so that you want to sell your home and go away somewhere. Then the remodeling of your home is a must.

If you are going to remodel your home you are sure to be aware of the facts of the warehouses associated with the home improvement. You may experience tough time when you go through a phase of remodeling your home. The busy shouts of the carpenters or the masons may offer you complete annoyance but if you can tolerate it you may have a dazzling home once again.

If you always think of the budget you may miss the thrill of remodeling the home. You have to dodge past the problem and manage anyway the money either in the form of loan or from your bank to meet the cost of the remodeling. But once you can invest you are sure to be one of he happiest guys of the world. You can be amazed to view the picture of your remodeled home. You may even compare how your old home was and how it is now after the total remodeling.

Again when the time comes to sell your home, remodeling is the best way. You may improve your drawing room or the kitchen. It is sure the selling price is sure to increase. A minimum investment can bring forth the maximum profit. What you have to do is to consult an expert who is associated with the home improvement matters before you plunge in the mission of remodeling your home. An expert can offer you some help regarding the allocation of your hard earned money. In this way you can bring back the sweet return.

Popularity: 1% [?]

How to Seal Fireplace Opening

Posted by admin
Categorized Under: Do It Yourself, Home Improvement, How To
Comments: 0

The wooden frame method is best if you are likely to want to open up the fireplace at a later date or if you are sealing the opening for use with a gas neater. In this case, the cover should be of asbestos-free insulation board, rather than with sheetrock.

Blocking-up produces a solid wall that is unlikely to crack. Of course, you could always remove the blocks later on to reopen the flue, but they will not prove as easy to dislodge in future as a framed infill.

In most cases the constructional concrete hearth can be left in place. Skimming it with a layer of mortar will bring the surface up to floorboard level. When the floorcovering is laid, the hearth will not be seen.

The only reason for removing a construction­al hearth would be if the floorboards are to be left exposed in the room. Here you will have to remove the hearth and lay new joists and floorboards to match the existing floor.

If you decide to seal the opening with blocks, it is a good idea to fit stainless steel block-jointing channel to the inside edges of the wall at each side of the opening. This way you will avoid having to chip out bricks to bond the new blocks into the wall at each side.

Make sure you fit a ventilator into the new wall three or four courses up from the floor to provide ventilation into the flue. Providing the vent block is set this high, it will not get blocked if debris subsequently falls down the flue.

To make a frame for the operuhg on which to fix the sheetrock or insulation board, use 2 x 3in sawn wood. Cut the head and sill (bottom) frame members first so they wedge into place. Then cut the side (upright) members so they wedge in place between them.

Set the framing so that the face of the board when fixed will either be level with the surrounding masonry, if the wall is to be plastered in the normal way, or so the sheetrock will be level with the surface of the surrounding plaster for direct decoration.

When the wooden framework is correctly positioned, fix the uprights to the side walls with screws and wall plugs, then toe-nail the head and sill members to the uprights. Fix the sheetrock in place with galvanized screws or nails, fixing the board with the grey side facing outwards for plastering or the cream side outwards for direct decoration.

With a keyhole or saber saw, cut a 9 x 3in section out of the board and glue a plastic or metal ventilator plate over this hole.

Popularity: 1% [?]